J-wheelz are tire attachments for off-road vehicles. The four wheel attachments allow you to add traction to your ATV, UTV, or 6-wheel vehicle, so you can get through anything – snow, mud, swamps, and more.
It's cheaper than tracks, lighter than duals, and more effective than stock tires – all while just using a simple bolt-on attachment method.
Fits 10mm wheel studs including most machine brands:
Fits 3/8” wheel studs found on Polaris machines.
Note Exception: 2009+ Polaris XP ATV’s have 10mm wheel studs and use 10mm J-wheelz kit
Fits 12mm wheel studs, typically, for side-by-sides.
Fits 7/16th wheel studs. For very specific models.
Fits 1/2 Inch wheel studs. For very specific models.
The standard blades are 12 inches tall and are considered the medium fit.
The tall blades are 27 to 30 inches tall. The goal is to not let the paddles touch the ground on a firm surface.
If you're still unsure what J-wheelz sizes will work best for your vehicle, call your dealer and confirm with them.
Designed to fit 24″ and larger tires and to accommodate any standard 4 bolt pattern. Can be used on ATV’s, UTV’s, and 6×6 Vehicles and are not affected by rim diameter. Also available to fit Argo and Max utility vehicles. Additional specialized fittings to accommodate less prevalent applications may be possible for an additional cost. Contact us for more information.
Width:
Adds 20 total inches of width to whatever machine they are installed on (10 inches per side).
Break Through Mud
Muddy fields, muddy grasslands. You need J-wheelz.
Works On Snow or Ice
Snow or ice on land or lakes.You need J-wheelz.
Easy Install
Using a simple bolt-on attachment method, you can be ready to go in 15 minutes.
Consists of a durable impact resistant copolymer shell made from materials similar to plastics used in automotive bumpers which are known for impact rebound. This material is extremely durable and rated for temperatures down to -20º F.
Because of the care put into material selection, these are the best of all worlds. Weighing in at only 7lbs each, they won’t weigh down a machine, but are extremely durable.
Installation is simple. Replace two existing lug nuts with provided coupler extension nuts, then bolt into coupler nuts. There is no need to jack up your machine or take off your existing tire. Total time needed to install is between 10-15 minutes.
